Chapter 8
8-2 Command Reference Guide for the Avaya P580 and P882 Multiservice Switches, v6.1
set huntgroup
Command Mode Global Configuration.
Description Creates a huntgroup, modifies an existing huntgroup or removes a
huntgroup. If no load-sharing value is specified, then a huntgroup is created
with load-sharing enabled. Use the clear huntgroup form of this command
to remove a huntgroup.
Syntax
Sample Output The following example creates huntgroup hg1 and disables load-sharing.
(configure)# set huntgroup hg1 load-sharing disable
HuntGroup “hg1” created
Systems P550R, P580, P880, and P882.
To Configure: set huntgroup <huntgroup-name> [load-sharing
{enable | disable}]
To Delete: clear huntgroup <huntgroup-name>
Table 8-1. Parameters, Keywords, Arguments
Name Definition
<huntgroup-
name>
The unique string used to identify a huntgroup. If the name
is not unique to the huntgroup, then it is assumed that an
existing huntgroup is being modified.
load-sharing The load sharing capability.
• {enable | disable} - Enables or disables load sharing.
