Document No. 10-300090, Issue 1 13-17
IPX
Sample Output The following example:
■ sets the IPX RIP filter precedence to 5
■ sets the start-network to 2
■ sets the end-network to 3
■ applies filters to RIP packets in both directions (both)
■ adds the network to the routing table (allow)
■ sets the filter ticks to 10000
■ sets the filter hops to 5
on an interface labeled “boston”.
(config-if:boston)# ipx rip-filter 5 2 3 both allow 10000 5
Systems P550R, P580, P880, and P882.
<filter-ticks> Modify the number of ticks to get to the network in the
routing table (inbound RIP packets) or in the advertised
information (outbound RIP packets). The range is 0 to 32000
ticks.
<filter-hops> Modify the number of hops to get to the network in the
routing table (inbound RIP packets) or in the advertised
information (outbound RIP packets). The range is 0 to 16
hops.
Table 13-6. Parameters, Keywords, Arguments
Name Definition
2 of 2
