Document No. 10-300090, Issue 1 11-13
IP
ip bootp-dhcp circuit-info
Command Mode Global Configuration.
Description Enables BOOTP/DHCP option 82, suboption 1 (circuitID). The no
command disables option 82, suboption 1.
This suboption identifies the slot and physical port number from which the
DHCP request was received. The default setting is disabled.
* Note: Before you enter this command, make sure that the switch is set
to be a BOOTP/DHCP relay agent. Use the ip bootp-dhcp relay
command to enable BOOTP/DHCP relay agent on the switch.
Syntax
Systems P550R, P580, P880, and P882.
To Enable: ip bootp-dhcp circuit-info
To Disable: no ip bootp-dhcp circuit-info
