Filter
Top Products
1312
Connecting the uMic and uDirect 2
Every time the devices are turned on, they will
connect with each other automatically.
1. Make sure the uDirect 2 and uMic are within
2 meters (6ft) range of each other.
2. Turn the uMic on.
3. The indicator light will turn green
first.
4. Wait until the indicator lights of
both devices turn solid blue. This
may take up to 30 seconds but
usually occurs within 5 seconds.
The uDirect 2 will confirm the connection via
spoken notifications or beeps in your hearing
aids, depending on the uDirect 2 configuration.
If the status light is rapidly blinking blue after
turning on the uMic or if the status light does
not turn solid blue within two minutes, repeat
the pairing.
Preparing the uDirect 2
1. Turn the uDirect 2 on.
2. Always wear the uDirect 2 around the neck.
3. Make sure both plugs are well connected in
the neckloop sockets.
For a more detailed explanation of the uDirect 2,
please refer to the uDirect 2 user guide.
green
blue