Filter
Top Products
2322
Deleting all Bluetooth pairings
If you encounter issues with one of the paired
devices, or if a device stops connecting to your
uMic, you may consider deleting all pairings
from the uMic.
1. Turn the uMic on while pushing the
( ) button and hold the button for
10 seconds. This deletes all pairings.
2. Release the
( ) button when the
blue indicator light turns green.
Deleting the pairing of Bluetooth
devices removes the ability to connect to any
previously paired Bluetooth device. You need to
perform the pairing process again (see page 8) if
you wish to reconnect.
The status light will rapidly blink blue for a few
seconds after pairings were deleted (automatic
pairing mode).
Support of multiple uMics
It is not possible to stream audio from two
uMics to one uDirect 2 at the same time.
However, two uMics can be paired to uDirect 2
and then accessed sequentially by pressing
the uDirect 2 access button. With each press,
the uDirect 2 selects the next uMic in a fixed
sequence.
If a cellular phone is connected to uDirect 2
already, only one uMic can be supported.
Use of the lanyard
For transportation you
may use the detachable
lanyard as illustrated.