Filter
Top Products
98
Put uMic into pairing mode:
If the uMic has never been paired before,
pairing mode will be automatically activated
after turning it on.
To manually start pairing mode:
1. Switch the uMic off.
2. Press and hold the volume up
button (
).
3. Turn the uMic on while still
pushing the (
) button.
4. Release the (
) button after
2 seconds when the indicator light rapidly
blinks blue.
5. Make sure the uDirect 2 and uMic are within
1 m (3 ft) range of each other.
The uMic will remain in pairing mode for two
minutes or until the pairing is completed.
Pairing the uMic with uDirect 2
Before using the uMic with a streamer for the
first time, the devices must be paired with each
other.
If you are not using uDirect 2 but another
streamer, please follow the Bluetooth pairing
procedure of that device.
Put uDirect 2 into pairing mode:
1. Switch on the uDirect 2 (
).
2. Press and hold the connect (
) and volume
(
) buttons simultaneously for 2 seconds
until the audio indicator starts to rapidly
blink blue. The uDirect 2 will remain in pairing
mode for two minutes or until the pairing is
complete.
2 sec