Filter
Top Products
1918
Special use cases
uMic and phone calls
Phone calls via Bluetooth will always take
priority over the uMic streaming.
If uDirect 2 is paired with your mobile phone,
you can still receive phone calls, even when
using uMic. In case of an incoming call, uDirect 2
automatically stops transmitting the audio
signal from your uMic and and sends the signal
from your mobile phone to your hearing aids
instead.
“click”
To accept an incoming call, briefly press the
uDirect 2 access (
) button once you hear the
ringtone through your hearing aids. Press the
access button again and the phone call will end.
Switching the uMic off
To end the uMic transmission
completely, switch off the uMic by
sliding the power switch to the off
position.
In the off position, the white marking cannot be
seen.
Switch the uMic off when not in use.
If the uMic connection to a streamer was lost
for more than 30 minutes, the uMic will go into
sleep mode to save power. The light indicator
will turn off and a uMic re-start (turn off and on
again) is required to resume the transmission.