Filter
Top Products
ASPIRE SERVICE MANUAL
PAGE 13
2003SUNRISE MEDICAL
Disassembly/Reassembly, and Adjustment (cont)
Disassembly
Note: Make sure the cog release pivot joints are in a posi-
tion that matches the shroud cutout.
a. Use a #2 Phillips screw driver to remove the four mount-
ing screws and slide out while lifting off the top shroud
from the back of the chair.
(figure s4.1).
b. Use a #2 phillips screw driver to remove the six mount-
ing screws on the inside of the shroud to remove the side
shroud fairing (figure s4.2)
c. Lift the color side shrouds from the side shroud fairing.
Note: Color side shrouds are attached using a hook and
loop fastener system.
Reassembly
a. Perform the reverse of instructions above.
Note: Remember short screws to rear and middle holes
and long screws to front.
Step 4 - Shroud
s4.1
s4.2