Sunrise Medical 931157 Mobility Aid User Manual


 
Disassembly/Reassembly, and Adjustment (cont)
ASPIRE SERVICE MANUAL
PAGE 12
2003SUNRISE MEDICAL
Disassembly
a. Turn each of the two cog release handles counter-clock-
wise to unscrew them.
Note: For better access, pull the cog release handle to the
free-wheel position (figure s2.1).
Reassembly
a. Hold the cog release pivot joint, and thread the cog
release handle back to the pivot joint.
Adjustment
Tighten the Jam nut to set the cog release handle to the
correct orientation.
Note: It is recommended that the handles end up facing
outward.
Step 2 - Cog Release
Disassembly
a. Remove the cap from the left side of the front shroud
(Figure s3.1)
b. Pull the spring loaded release pin to disengage the seat
post. While holding the Spring Loaded Release Pin, slide
the seat post to it’s maximum height position to expose the
small quick release pin at bottom of shaft. (Figure s3.2)
c. Remove the small quick release pin, pull the Spring
Loaded Release Pin and remove the seat post.
d. Pull out the three remaining quick release pins, and
remove all other seat posts.
Reassembly
a. perform the reverse of instructions above.
Step 3 - Seat Posts
s2.1
s3.1
s3.2