Filter
Top Products
SSE 5 BL
General instructions 1-3
1.2. Explanations and information
Various terms and designations are used in these operating instructions to ensure clarity.
Therefore please note that the terms used in the text stand for the corresponding explanations
listed below.
• Equipment: ”Equipment” can mean an individual unit, a machine or an installation.
• Operating personnel: The ”operating personnel” are persons operating the equipment on their
own responsibility or according to instructions.
• Operator: The ”operator” of the equipment (production manager, foreman, etc.) is the person
responsible for all production sequences. The operator instructs the operating personnel of
what is to be done.
• Operating instructions: The ”operating instructions” describe the interaction of the equipment,
production sequences or methods. The operating instructions must be compiled by the
operator of the equipment.
• Equipment foreman: When several operating personnel work on one machine, the
”equipment foreman” coordinates the sequences. The equipment foreman must be appointed
by the operator.
• Trained personnel: ”Trained personnel” are persons who, due to their training, are authorized
to carry out the required work.
1.3. Legal basis
See “Manufacturer’s Certificate” resp. “Certificate of Conformity”.
1.4. Fields of applications
Sterling single conveying units are designed for use in facilities in which require independent
machine conveying systems. The single conveying units have been developed for conveying
thermoplastic granules. A typical area of application is for processing machines and drying
hoppers with throughputs of up to 500 kg/h (1090 lbs/hr).
1.5. Notes on usage
• Experienced operators can begin directly with the chapter on “Start-up” if the unit has been
properly installed.
• If the unit has not been installed yet, observe the instructions in the chapters “Transport,
Assembly and Storage” and “Assembly Instructions”.