Filter
Top Products
SSE 5 BL
Assembly instructions 25
8.4. Mounting onto mixing hoppers with lateral inlet
A material hopper VT 2,3/70/VT2,8/70 is required:
Mount the material hopper onto the swan-neck of the
mixing hopper.
Mount the unit onto the intermediate hopper.
F Observe the bearing capacity of the machine flange.
8.5. Mounting onto dosing station DT 30
An adapter piece AD 1/5 is required:
Mount the dosing hopper directly onto the dosing container
of the dosing station DT 30.
Mount the unit onto the dosing hopper.
F Observe the bearing capacity of the machine flange.
Figure 7: VT 2,3/70/2,8/70
Figure 8: AD 1/5
30