Filter
Top Products
SSE 5 BL
Putting into operation 3-4
3.3. Setting the controller
F The filling capacity of the hopper loader may not exceed the
material inlet.
& The setting is independent of the conveying line and the material
to be conveyed.
It is only possible to set the conveying time/line clear time when
the unit is not conveying any material.
Setting the conveying time
Press the “arrow key”.
& The conveying time which was last selected appears in the
display.
1-99 seconds may be set for the conveying time.
The conveying capacity is too highlow (the separator is overcrowded):
Reduce the conveying time.
The conveying capacity is too low:
Increase the conveying time.