Filter
Top Products
SSE 5 BL
Assembly instructions 24
8.2. Mounting on the processing machine
A material hopper VT 2,3/70 / VT 2,8/70 is required:
Mount the material hopper onto the flange of the
processing machine.
Mount the unit onto the material hopper.
F Observe the bearing capacity of the machine flange.
8.3. Mounting onto a machine hopper
A welding flange EF 190 or an assembly flange MF 253 is required:
L Please observe all safety regulations for the operation of welding
equipments.
Always wear a safety goggle.
Weld the welding flange into the machine hopper lid.
Mount the unit onto the flange.
Or
Mount the assembly flange.
Mount the unit onto the flange.
Figure 6: VT 2,3/70 / VT2,8/70
Figure 6: EF 253
Figure 6: MF 253