Filter
Top Products
GB
19
4.
5.
6.
7.
8.
3.
2.
Teaching
It is necessary to enter perso-
nal data for each correspon-
ding person and to step on
the scale with bare feet
immediately after data entry
to ensure correct functionality
of this body analysis scale.
1. Place scale on a table for
programming.
2. Start data entry (push
key for 1 second).
3. Memory location
(P1 ... P8) select
(▼= minus, ▲ = plus) and
confirm ( ).
4. Enter your height
(▼= minus, ▲ = plus) and
confirm ( ).
5. Enter your age
(▼= minus, ▲ = plus) and
confirm ( ).
6. Select sex using ▼/▲ (
=male, =female)
and confirm ( ).
7. Set the value of your indi-
vidual activity level accor-
ding to the table on the
next page (▼=minus,
▲=plus).
Push key and
hold for 3 seconds
until "0.0” appears
on the screen.
8. Following this, immediately
place the body analysis
scale on the floor, wait
until the screen displays
"0.0" and then step on the
scale with bare feet.
The initial measurement is
indispensable and serves
to store the data and to
automatically recognize
persons at a later time. If
no person steps on the
scale, data entry must be
repeated.
The first body analysis is
performed after a person
steps on the scale.
This scale is equipped with
a Time-Out mode.
It will automatically switch
off after approx. 40
seconds if no keys are
pressed.
Data must be entered
again after battery change.
BA63161BB-Shape-F4-D_GB.qxd 16.05.2008 13:02 Uhr Seite 19