Filter
Top Products
10
Mask and air tubing settings
Use the following settings below for each mask type:
Mask type Settings
Full Face Full Face
Pillows Pillows
Nasal Nasal (for Ultra Mirage mask, use ‘Nasal Ultra’)
Pediatric Pediatric
Notes:
• For more information on assembling the mask see the mask user guide.
• For a complete list of recommended masks and their settings go to www.resmed.com on the
Products page under Service & Support. If you do not have internet access, please contact your
ResMed representative.
The S9 VPAP Tx is compatible with the following air tubing:
Air tubing Specifications Settings
ClimateLine Heated
Length: 6’6” (2 m)
Inner diameter: 0.6” (15 mm)
Automatically detected
ClimateLine
MAX
Heated
Length: 6’3” (1.9 m)
Inner diameter: 0.75” (19 mm)
Automatically detected
SlimLine Length: 6’ (1.8 m)
Inner diameter: 0.6” (15 mm)
If using the SlimLine, Standard or 3 m
air tubing, adjust the tube setting via the
Setup menu.
Standard Length: 6’6” (2 m)
Inner diameter: 0.75” (19 mm)
3 m Length: 9’10” (3 m)
Inner diameter: 0.75” (19 mm)
Notes:
• When using the SlimLine or ClimateLine above 20 cm H
2
O, the device optimum performance may
not be reached if used with an antibacterial filter. The device performance must be checked prior to
using the SlimLine for use with an antibacterial filter.
• The ClimateLine/ClimateLine
MAX
are designed only for use with the H5i.