Filter
Top Products
38
Legend
Your Legend requires a minimal amount of care and maintenance. If you do not feel confident in your
ability to perform the maintenance listed below, you may schedule inspection and maintenance at your
authorized Pride provider. The following areas require periodic inspection and/or care and maintenance.
TIRE PRESSURE
n For optimum Scooter performance we recommend that the tire pressure be maintained at 30-35 psi.
WARNING! Do not exceed 35 psi; overinflating a tire can cause it to explode.
n Regularly inspect your Legends tires for signs of wear.
n Use a rubber conditioner on your Legends tires to help to preserve them.
n Do not put rubber conditioner on tire tread; this may cause the tires to become dangerously slippery.
EXTERIOR SURFACES
n Bumpers and trim also benefit from an occasional application of rubber or vinyl conditioner.
WARNING! Do not apply a rubber or vinyl conditioner on the Scooters vinyl seat or tire tread; they
will become dangerously slippery.
BATTERY TERMINAL CONNECTIONS
n Make certain that the terminal connections remain tight and uncorroded.
n The batteries must sit flat in the battery wells.
n The battery terminals should face the rear of the Legend.
WIRING
n Regularly check all wiring connections.
n Regularly check all wiring insulation, including the charger power cord, for wear or damage.
n Have your authorized Pride provider repair or replace any damaged harness, connection, or insulation
that you find before using your Legend again.
ABS PLASTIC SHROUDS
n The control console assembly shroud, front shroud, and the rear shroud are formed from durable ABS
plastic and coated with an advanced formula urethane paint.
n A light application of car wax will help the shrouds retain their high gloss.
AXLE BEARINGS AND THE MOTOR/TRANSAXLE ASSEMBLY
n These items are all prelubricated, sealed, and require no subsequent lubrication.
MOTOR BRUSHES
n The motor brushes are housed inside of the motor transaxle/assembly. They should be inspected
periodically for wear by your authorized Pride provider.
CONSOLE, CHARGER, AND ELECTRONIC CONTROLLER ASSEMBLY
n Keep these areas free of moisture.
n If any of these items do become exposed to moisture, let them dry thoroughly before operating your
Legend again.
XII. CARE AND MAINTENANCE