Filter
Top Products
32
Legend
90° ADJUSTMENT HOLE
100° ADJUSTMENT HOLE
102° ADJUSTMENT HOLE
105° ADJUSTMENT HOLE
FIGURE 15. SEATBACK HINGE
ADJUSTMENT SCREW
UPPER HINGE
LOWER HINGE
SEATBACK ADJUSTMENT
The seatback may be positioned to four
different angles: 90°, 100°, 102°, and 105°.
See figure 15.
To adjust the seatback angle:
1. Loosen and remove the adjustment screw
from both seatback hinges.
2. Reposition the seatback to the desired
angle.
3. Align the adjustment holes from the
upper and lower hinge, so the adjustment
screw can easily pass through.
4. Reinsert both adjustment screws and
tighten.
FIGURE 16. POWER SEAT ACTUATOR
(OPTIONAL)
SEAT ACTUATOR
WARNING! The power seat mechanism is
intended for operation only while the vehicle
is stationary and on a level surface. Its
purpose is to aid you in reaching objects.
Strict adherence to the following safety rules
is vital to your safety: Do not attempt to raise
or lower the seat while in motion! Do not
operate your Scooter with the power seat
elevated. It is recommended that the vehicle
be driven only with the seat in the lowest
position.
POWER SEAT ACTUATOR (OPTIONAL)
Your Legend may be equipped with a power seat actuator which
raises and lowers the seat automatically. See figure 16.
VIII. COMFORT ADJUSTMENTS