Pride Mobility SC300 Mobility Aid User Manual


 
20
Legend
V. YOUR LEGEND
Do not expose the control console assembly to moisture. In the event the console does become exposed to
moisture, do not attempt to operate your Legend until it has thoroughly dried.
Key Switch
n Fully insert the key into the key switch to power up (turn on) your Legend.
n Pull the key out to power down (turn off) your Legend.
Speed Adjustment Dial
This control dial allows you to preselect and limit your Legends top speed.
n The image of the tortoise represents the slowest speed setting.
n The image of the hare represents the fastest speed setting.
Throttle Control Lever
This lever allows you to control the forward and reverse speed of your Legend up to the maximum speed
you preset with the speed adjustment dial.
n Place your right hand on the right handgrip and your left hand on the left handgrip.
n Use your right thumb to push the right side of the lever to disengage your Legends brakes and move
forward.
n Release the lever and allow your Legend to come to a complete stop before pushing the other side of the
lever to move in reverse.
n When the throttle is completely released, it automatically returns to the center stop position and
engages your Legends brakes.
Batter Condition Meter
Whenever you have the key fully inserted, this meter gives an approximate reading of your Legends
battery voltage.
Horn Button
n The key must be fully inserted into the key switch for the horn to be operational.
n This button activates a warning horn.
n Do not hesitate to use the warning horn when its use could prevent accident or injury.
WARNING! If the key is removed from the key switch while your Legend is in motion, the
electronic brakes engage and your Legend comes to an abrupt stop!