Filter
Top Products
30
Legend
TILLER ANGLE ADJUSTMENT
You can adjust the tiller to three positions between the
forward stop and the Scooter deck.
1. Pull up on the tiller adjustment lever. See figure 11.
2. Move the tiller to a comfortable position.
3. Release the tiller adjustment lever and push the tiller
forward making sure it is locked into place.
SEAT HEIGHT ADJUSTMENT
The seat can be repositioned to one of five different heights.
1. Remove the seat from your Legend. See IX. Disas-
sembly and Assembly.
2. Use the attached ring to pull and remove the ball detent
pin from the lower seat post. See figure 12.
3. Raise or lower the seat pedestal to the desired seat height.
4. Hold the seat pedestal at that height and match up the
holes in the seat pedestal and in the lower seat post.
5. Fully insert the ball detent pin.
6. Replace the seat.
FRONT-TO-BACK SEAT ADJUSTMENT
The Legend is equipped with a sliding seat that is operated
like an automobile seat. You can reposition the Legends
seat forward or rearward.
1. Pull the front-to-back seat release lever to the left. See
figure 13.
2. Move the seat forward or rearward.
3. Release the front-to-back seat lever.
SEAT ROTATION
The seat lock lever locks the seat in one of four positions.
1. Push down on the seat lock lever to unlock the seat.
See figure 13.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely in
place.
WARNING! Remove the key before adjusting the tiller. Never attempt to adjust the tiller while the
Scooter is in motion.
NOTE: In order to lower the tiller to the Scooter deck, you
must first remove the seat and both batteries. See IX.
Disassembly and Assembly.
FIGURE 11. TILLER ADJUSTMENT
TILLER
ADJUSTMENT
LEVER
BALL DETENT PIN
SEAT PEDESTAL
FIGURE 12. SEAT HEIGHT ADJUSTMENT
FIGURE 13. SEAT ADJUSTMENTS
ARMREST ADJUSTMENT KNOBS
FRONT-TO-BACK SEAT RELEASE LEVER
SEAT LOCK LEVER
LOWER SEAT POST
VIII. COMFORT ADJUSTMENTS