Filter
Top Products
US Jet 1 ATS/Rev B/Jul03 www.pridemobility.com 25
To raise or lower the footrest:
1. Remove the two 7/16-in. bolts and their nuts from the footrest.
See figure 17.
2. Raise or lower the footrest to the desired height.
3. Install and tighten the two 7/16-in. bolts and nuts.
FOOTREST ANGLE
You can adjust the angle of the footrest with a 7/32-in. hex key and
a 1/2-in. box or open-end wrench. See figure 18.
To adjust the footrest angle:
1. Loosen the jam nut.
2. Turn the setscrew clockwise to lower the front of the footrest.
3. Turn the setscrew counterclockwise to raise the front of the
footrest.
4. Tighten the jam nut.
SWING-AWAY FOOTRESTS OPTION
Swing-away Footrests (SFRs) are an option. They enable you to
move the footrests to the side before getting on or off your Jet 1.
To move the SFRs:
1. Push in the release lever. See figure 19.
2. Move the SFRs out.
ELEVATING LEG RESTS OPTION
Elevating Leg Rests (ELRs) offer an infinite number of adjustments,
within their range of movement, for the leg angle and a footrest
adjustment range of 1219 inches.
To adjust the ELR angle:
1. Press the release lever. See figure 20.
2. Move the leg rest to the desired angle.
To adjust the ELR footrest height:
1. Remove the two screws from the side of each leg rest extension.
See figure 21.
2. Loosen the bolt on the side of each leg rest extension.
3. Slide the leg rest in or out to the desired length.
4. Tighten the bolt and install the two screws on each leg rest extension.
VI. COMFORT ADJUSTMENTS
Figure 18. Footrest Angle
TURN SETSCREW
TO CHANGE
FOOTREST ANGLE
SFR RELEASE
LEVER
Figure 19. Swing-Away Footrests
Figure 20. Elevating Leg Rests
RELEASE
LEVER
Figure 21. Elevating Leg Rests
LEG REST
ADJUSTMENT
SCREWS