Filter
Top Products
US Jet 1 ATS/Rev B/Jul03 www.pridemobility.com 23
VI. COMFORT ADJUSTMENTS
Figure 13. Seat Tower Nut and Bolt
NUT AND BOLT
Figure 14. Armrest Width
LOOSEN SETSCREW
TO MOVE ARMREST
To install the joystick controller:
1. Use a 3/16-in. hex key to loosen the setscrew. See figure 12.
2. Slide the joystick mounting bracket into or out of the armrest to the desired position.
3. Retighten the setscrew.
CAUTION! Do not place the controller cable so that it can be pinched in the seat frame or the power
base frame.
After you have become familiar with your Jet 1s operation, you may find the need to adjust the seat. There are
some adjustments you can make to increase your comfort such as seat height, armrest width, armrest angle,
footrest height and angle, joystick extension, footrest height, and foot rest angle.
WARNING! If your power chair was configured at your authorized Pride provider or service center,
please consult your health care professional before changing the seat position or making any other
adjustment. Some adjustments may degrade your power chairs performance and safety by
changing its center of gravity.
SEAT HEIGHT
You can change the seat height manually.
To change the seat height:
1. Remove the seat. See VII. Disassembly.
2. Remove the nut and bolt from the seat tower. See figure 13.
3. Raise or lower the seat tower to the desired position.
4. Install the nut and bolt into the seat tower.
5. Install the seat.