Filter
Top Products
US Jet 1 ATS/Rev B/Jul03 www.pridemobility.com 21
Figure 7. Seatback Assembly
SCREWS
To reduce the possibility of shipping damage, your Jet 1s seat is removed from the power base, and the seatback
is removed from the seat assembly before your Jet 1 is shipped. The joystick may also have been removed from
the armrest. The following is a set of instructions to help you quickly and easily prepare your Jet 1 for immediate use.
Required Tool: Phillips screwdriver
Parts List Quantity
Phillips-head seatback mounting screws 4
Expandable arm 1
Expandable arm with joystick 1
Seatback 1
8-in. wire ties 4
SEATBACK ASSEMBLY
The seatback mounts to the back hinges with four (4) Phillips-head screws. To get to the hinges, lift up the reusable
fasteners that cover them in the back. See figure 7. You may install the seatback before or after you install the seat
to the power base.
To mount the seatback to the hinge:
1. Line up the hinges with the holes in the seatback. See figure 7.
2. Insert the seatback mounting screws through the hinge and into the seatback.
3. Tighten the four screws.
V. ASSEMBLY