Filter
Top Products
US Jet 1 ATS/Rev B/Jul03 www.pridemobility.com 19
Figure 4. Utility Tray
AMMETER
CONTROLLER HARNESS CONNECTORS
BATTERY CHARGER
POWER OUTLET
MAIN CIRCUIT BREAKER
UTILITY TRAY
The utility tray is located at the rear of your Jet 1. The utility tray is exposed through the body shroud. The utility
tray consists of the battery charger power outlet, the ammeter, the main circuit breaker, and the controller harness
connectors.
n Ammeter: The ammeter displays the chargers current output in amps. See figure 4. For more information,
see IX. Batteries and Charging.
n Battery charger power outlet: This is where the battery charger power cord is to be plugged in. See figure
4. The battery charger power cord is not attached to the unit at all times. See figure 3. For more information,
see IX. Batteries and Charging.
n Main circuit breaker: The main circuit breaker is a safety feature built into your Jet1. See figure 4. When the
batteries and the motors are heavily strained (e.g., from excessive loads), the main circuit breaker will trip to
prevent damage to the motors and the electronics. If the circuit trips, allow your Jet1 to rest for approximately
one minute. Next, push in the circuit breaker reset button, turn on the joystick controller, and continue normal
operation. If the main circuit breaker continues to trip repeatedly, contact your authorized Pride provider.
n Controller harness connectors: This is where the joystick connects to the motors, the batteries, and the
charger. Since your Jet 1 is equipped with a Dynamic controller, there are two connectors on the tray. See
figure 4.
IV. THE JET 1