Filter
Top Products
Basic Operation Instructions 7
www.pridemobility.com Dynamic Controller
DYNAMIC CONTROLLER
The Dynamic controller is a modular electronic controller system that allows you to
operate your power chair. It is designed to allow the user to have complete control
over chair movement and speed.
The controller is available in both 50-amp and 60-amp configurations, and has
been pre-programmed to meet a typical user’s needs. The program is set using
either a personal computer with software provided by the controller manufacturer
or with a hand-held programmer, also provided by the controller manufacturer.
WARNING! The controller program can affect speed,
acceleration, deceleration, dynamic stability, and braking.
If it is programmed incorrectly or outside of the safe limits
as determined by your healthcare professional, it can create
a dangerous situation. Only the power chair manufacturer,
an authorized representative of the manufacturer, or a trained
service technician should program the controller.
PRECAUTIONARY GUIDELINES
Before operating the Dynamic controller, please read the following. These guidelines
are provided for your benefit and will aid you in the safe operation of the controller
system.
! Turn off the power to the controller when transferring to or from your power
chair.
! Follow all of the procedures and heed the warnings as explained in your power
chair owner’s manual.