Filter
Top Products
Basic Operation Instructions 15
www.pridemobility.com Dynamic Controller
Speed Keys
There are two keys that control the speed. Press the speed increase key to in-
crease the speed. Press the speed decrease key to decrease the speed. The speed
setting is displayed on the speed setting indicator. If your power chair was pro-
grammed with a drive profile, contact your authorized Pride Provider for more
information.
NOTE: We recommend that the first few times you operate your power
chair, you set the speed to the slowest setting until you become familiar
with your new power chair.
Speed Setting Indicator
The speed setting indicator indicates the current speed of your power chair. The
speed setting indicator consists of 16 lights arranged clockwise around the horn
key. As the speed of the power chair increases, the number of lights increases.
There are five larger LEDs which represent 0%, 20%, 40%, 60%, 80%, and
100% of the power chair’s maximum speed. Press the speed decrease key or
speed increase key once to adjust the speed in the five larger increments. Press
and hold the the speed decrease key or speed increase key to adjust the speed in
individual increments.
NOTE: When the bottom, left-most green LED is flashing, it indicates
that the controller is in speed limit mode.
Service Indicator
The service indicator displays Dynamic controller error codes. Refer to “Error
Codes.”
Attendant Control Indicator (For Optional Equipment)
The attendant control indicator is on when the optional Attendant Control Unit is
activated.
Actuator Select Key with Lights (For Optional Equipment)
If your power chair is equipped with power accessories such as a power seat or
power elevating leg rests, you can operate them through the keypad. Refer to
“Actuator Adjustment.”