Filter
Top Products
16 Basic Operation Instructions
Dynamic Controller www.pridemobility.com
Right/Left Turn Indicator Keys (For Optional Equipment)
The right/left turn indicator keys toggle either the left or right turn indicators. Press
once to turn on and press again to turn off. You can also turn off the selected turn
indicator by pressing the opposite indicator key or the hazard key.
Light Key (For Optional Equipment)
The light key turns the headlights/taillights on and off independent of other indicators.
Hazard Key (For Optional Equipment)
The hazard key activates both turn indicators at the same time. You can only
cancel this by pressing the hazard key again.
CONTROLLER CONNECTOR
This connects the Dynamic controller to the power module located on the power
base.
OFF-BOARD CHARGER/PROGRAMMING SOCKET
You may use an off-board charger to charge the power chair batteries through the
3-pin socket located on the front of the Dynamic controller. If you use an off-
board charger, the charger current should not exceed 8 amps. Contact your au-
thorized Pride Provider for more information.
WARNING! Only chargers with Neutrik NC3MX plugs should
be connected to the off-board charger/programming socket.
See your authorized Pride Provider for more information.
NOTE: The socket may also be used for reprogramming the Dynamic con-
troller. Contact your authorized Pride Provider for more information.
LOCK MODE
The Dynamic controller is equipped with a feature that enables you to “lockout”
unauthorized users.
To lock the Dynamic controller:
1. While the power is on, press and hold the on/off key for 4 seconds. The
display will turn off immediately. After 4 seconds, all LEDs will flash briefly
and the horn will sound a short beep.
2. The Dynamic controller is now locked.