Filter
Top Products
14 Basic Operation Instructions
Dynamic Controller www.pridemobility.com
Keypad
The keypad is located directly in front of the joystick. It contains keys that you will
use to control your power chair. See figure 2.
On/Off Key
The on/off key turns the system on and off.
WARNING! Unless faced with an emergency situation, do
not use the on/off key to stop the chair. This will cause the
power chair to stop abruptly.
WARNING! Always turn the power off when you are stationary
to prevent unexpected movement.
NOTE: If the joystick is not in the neutral (center) position when you turn
on the power, you may cause a fault in the system. See “Out Of Neutral At
Power Up (OONAPU).”
Horn Key
The horn key activates a warning horn.
Battery Condition Meter
The battery condition meter consists of eight lights arranged in an arc over the on/
off key. As the battery voltage drops, the number of lights reduces from right to
left. When the battery capacity drops to 10% or below, the left red LED will flash.
! Left Red LED Flashing: The battery charge is low; charge the batteries as
soon as possible.
! Right-to-Left Ripple of LEDs: The controller is in lock mode; unlock the
controller.
! Left-to-Right Ripple of LEDs Alternating with Steady Display: The
controller is in programming, inhibit, or charging mode. When the joystick is
moved, the speed gauge will also flash.