Filter
Top Products
20 www.pridemobility.com Z-Chair
INITIAL ASSEMBLY
Your Z-Chair may require some assembly either before initial use or after transportation. It may also require disassembly to
make some comfort adjustments. Figure 8 details those parts of the Z-Chair that are designed to be disassembled and
assembled by an end user or by a qualified caregiver before using the product or making comfort adjustments. There are two
hex keys provided for use with controller installation and adjustment and foot platform adjustment.
NOTE: Any nylon insert lock nut removed during the disassembly or adjustment of the Z-Chair must be
replaced with a new nut. Nylon insert lock nuts should not be reused as it may cause damage to the nylon
insert, resulting in a less secure fit. Replacement nylon insert lock nuts are available at local hardware stores
or through your authorized Pride Provider.
IV. ASSEMBLY/DISASSEMBLY
SEAT INSTALLATION
ARMREST WIDTH ADJUSTMENT
Figure 8. Z-Chair Assembly View
FOOT PLATFORM
DEPTH ADJUSTMENT
BATTERY REPLACEMENT
CONTROLLER POSITION
SEAT HEIGHT ADJUSTMENT