Pride Mobility Hurricane Mobility Aid User Manual


 
25Hurricane
Operating Your Power Seat
1. Ensure your Hurricane is level and stationary.
2. Toggle on the power seat switch.
3. To raise the power seat, place your hands on the handgrips and use your thumb to push the right side of the
lever.
4. Release the lever when you have attained your desired height.
5. To lower the power seat, place your hands on the handgrips and use your thumb to push the left side of the
lever.
6. Release the lever when you have attained your desired height.
7. Ensure your seat is in the lowest position and toggle off the power seat switch before you attempt to drive
your Hurricane again.
SLIDING SEAT ADJUSTMENT
You can move the sliding seat forward or rearward to suit your needs.
1. Pull up on the front-to-back seat release lever. See figure 12.
2. Slide the seat into a comfortable position.
3. Release the front-to-back seat release lever to lock the seat securely in place.
SEAT ROTATION
The seat lock lever locks the seat in one of four positions.
1. Pull up on the seat lock lever to unlock the seat. See figure 12.
2. Rotate the seat to the desired position.
3. Release the seat lock lever to lock the seat securely in place.
ARMREST WIDTH ADJUSTMENT
The armrest width of your Hurricane can be adjusted inward or outward.
1. Turn the armrest adjustment knobs at the back of the seat frame counterclockwise to loosen. See figure 12.
2. Slide the armrests in or out to the desired width.
3. Turn the armrest adjustment knobs clockwise to tighten.
VII. COMFORT ADJUSTMENTS
Figure 12. Seat Adjustments
Seat Lock Lever
Front-to-back Seat Release Lever
Armrest Adjustment Knobs
NOTE: You can also lift up the armrests to allow getting on and off of your Hurricane easier.