Pride Mobility Hurricane Mobility Aid User Manual


 
11Hurricane
IV. DESCRIPTION
Your Hurricane is an indoor/outdoor motorized electric scooter designed to enhance your personal mobility. It
was designed to travel primarily on smooth surfaces such as sidewalks, roads, parking lots, floors, and driveways.
For easy transportation or storage, you can disassemble your Hurricane into seven components. See figure 5.
To decrease the rear section weight or to charge your batteries while your Scooter is disassembled, you can
also remove the utility tray and its subcomponents from the rear section. For further information on disassembly,
see VIII. Assembly and Disassembly. For further information on charging your batteries while your Hurricane
is disassembled, see V. Batteries and Charging.
CONTROL CONSOLE ASSEMBLY
The control console assembly located on the front section houses all of the controls you need to operate your
Hurricane. See figure 6.
WARNING! Do not expose the control console assembly to moisture. In the event it does become
exposed to moisture, do not attempt to operate your Hurricane until it has thoroughly dried.
Tiller Adjustment Lever
This lever allows you to adjust the tiller between the forward stop and the scooter deck. For tiller adjustment
instructions, see VII. Comfort Adjustments.
Hazard Light Switch
This switch enables you to control your Hurricanes front and rear (amber) hazard lights.
n Toggle this switch to turn the hazard lights on and off.
Throttle Control Levers
These levers allow you to control your Hurricanes forward and reverse speed up to the maximum speed you
preset on the speed adjustment dial. For instructions on how to operate your Hurricanes throttle control, see
VI. Operation.
Batteries
Rear Section
Front Section
Seat
Rear Shroud
Front Basket
Figure 5. Hurricane Components