Filter
Top Products
24 www.pridemobility.com Jazzy 1100/RevJ/Feb03
VI. COMFORT ADJUSTMENTS
Figure 21. Joystick Extension
LOOSEN THIS
SETSCREW TO
ADJUST JOYSTICK
Figure 23. Swing-away Joystick
(Retracted Position)
Figure 22. Swing-away Joystick
(Forward Position)
ARMREST ANGLE
You can adjust the armrest angle to fit your specific needs.
To change the armrest angle:
1. Lift the armrest straight up so that it is perpendicular to the
floor.
2. Use a 7/16-in. wrench to loosen the jam nut. See figure 20.
3. Use a 5/32-in. hex key to loosen the adjusting screw.
4. Turn the screw clockwise to lower the front of the armrest, or turn
the screw counterclockwise to raise the front of the armrest.
5. Lock the adjusting screw into place by tightening the jam nut.
ARMREST HEIGHT (OPTIONAL)
Your Jazzy may be equipped with height-adjustable armrests.
To change the armrest height:
1. Loosen the setscrew located underneath the armrest using a
3/16-in. hex wrench.
2. Remove the ball detent pin from the armrest.
3. Move the armrest up or down to the desired height.
4. Align the holes and reinsert the ball detent pin.
5. Retighten the setscrew.
JOYSTICK EXTENSION
The joystick control can easily slide out away from the armrest, or
in toward the armrest.
To extend the joystick:
1. Use a 3/16-in. hex wrench to loosen the setscrew. See figure 21.
2. Slide the joystick mounting bracket into or out of the armrest
to the desired position.
3. Tighten the setscrew by turning it clockwise.
SWING-AWAY JOYSTICK
Your Jazzy may be equipped with a swing-away joystick. This
option enables you to move the joystick from the front of the arm-
rest to the side of the armrest, without disconnecting it. See fig-
ures 22 and 23.
JOYSTICK POSITION
The standard joystick can be mounted to the left or right side of
your Jazzy. Contact your authorized Pride provider.