Filter
Top Products
22 www.pridemobility.com Jazzy 1100/RevJ/Feb03
JOYSTICK INSTALLATION
Depending on the various configurations and options you have
chosen for your Jazzy, it may have been shipped without the
joystick installed in the armrest.
To install the joystick:
1. Use a 3/16-in. hex wrench to loosen the setscrew. See fig-
ure 15.
2. Slide the joystick mounting bracket into or out of the arm-
rest to the desired position.
3. Retighten the setscrew by turning it clockwise.
POWER SEAT OPTION INSTALLATION
Your Jazzy may be equipped with the power seat option. While
the seat itself may be any one of the styles offered for this model,
the way the seat base attaches to the Jazzy power base is different.
To install the power seat:
l. Align the seat shaft to the hole in the actuator. See figure 16.
2. Push the seat lever backward.
VERSA SEAT OR VERSA TILT OPTION
If your Jazzy is equipped with a Versa Seat or Versa Tilt, please
refer to the instruction manual supplied with the Versa Seat/
Versa Tilt.
V. ASSEMBLY
Figure 13. Front Seat Towers
LOCK SEAT INTO PLACE HERE
Figure 14. Controller Cable
PLUG IN CONTROLLER CABLE
Figure 16. Power Seat Actuator
POWER SEAT ACTUATOR
Figure 15. Joystick
SLIDE JOYSTICK
INTO BRACKET
SETSCREW