Filter
Top Products
EL320.240-FA3 Analog Dimming Response, Typical
0
20
40
60
80
100
120
01234
LUMA voltage, volts
Percentage of full luminance
Self Test Mode
The display contains a self test mode composed of patterns displayed at the
maximum frame rate for approximately four seconds each. Self test mode can
be useful for verifying operation of the display.
The self test patterns are as follows: yellow diagonal lines with a one sub pixel
wide perimeter box, all pixels red, all pixels green, and all pixels yellow. Upon
power up when in self-test mode, the pattern sequences are repeated three
times and then the pattern remains in the all pixels yellow state. The self test
mode is entered by leaving LUM0 and LUM1 disconnected or logically high.
EL320.240-FA3 Operations Manual Page 21 of 25