Filter
Top Products
25
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefi t
from the support that Philips offers, register your product at www.philips.
com/welcome.
Please read this user manual, as it contains information about the wonderful
features of this shaver as well as some tips to make shaving easier
and more enjoyable.
General description (Fig. 1)
A Shaver
1 Protection cap
2 Shaving unit
3 Shaving unit release button
4 Shaver on/off button
5 Shaving head symbol
6 Battery light
B Adapter
C Jet Clean System
1 Locking lever
2 Shaver holder
3 Cleaning chamber release button
4 Jet Clean System on/off button
5 Shaving head symbol
6 Battery symbol
D Jet Clean solution (HQ200)
E Cleaning brush
Important
Read this user manual carefully before you use the shaver and the Jet Clean
System. Save the user manual for future reference.
Danger
- Keep the adapter dry.
Warning
The adapter contains a transformer. Do not cut off the adapter to -
replace it with another plug, as this causes a hazardous situation.
The shaver and the Jet Clean System are not intended for use -
by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of these
appliances by a person responsible for their safety.
Children should be supervised to ensure that they do not play with -
the shaver and the Jet Clean System.
Always unplug the shaver before you clean it under the tap. -
Caution
- Never immerse the shaver in water.
- Never immerse the Jet Clean System in water nor rinse it under the
tap.
Do not use the shaver in the bath or in the shower. -
Never use water hotter than 80°C to rinse the shaver. -
Be careful with hot water. Always check if the water is not too hot, to -
prevent your hands from getting burnt.
The shaver, the Jet Clean System and the other accessories are not -
dishwasher-proof.
Water may leak from the socket at the bottom of the shaver when you -
rinse it. This is normal and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
Do not use the shaver, Jet Clean System, adapter or any other part if it -
is damaged, as this may cause injury. Always replace a damaged adapter
or part with one of the original type.
Use, charge and store the shaver and the Jet Clean System at a -
temperature between 10°C and 35°C.
Always place and use the shaver and the Jet Clean System on a surface -
that is fl uid-resistant.
Only use the adapter and accessories supplied. -
Always put the protection cap on the shaver to prevent damage and to -
avoid dirt accumulation in the shaving heads.
Only use the Jet Clean System with the original Jet Clean solution -
(HQ200).
Always place the Jet Clean System on a stable, level and horizontal -
surface to prevent leakage.
When the Jet Clean System is ready for use, do not move it to prevent -
leakage.
The Jet Clean System thoroughly cleans but does not disinfect your -
shaver, therefore do not share the shaver with others.
Empty the cleaning chamber of the Jet Clean System and clean the -
cleaning chamber thoroughly by rinsing it with hot tap water every 15
days.
If the shaver and the Jet Clean System are subjected to a major change -
in temperature, pressure or humidity, let them acclimatise for 30
minutes before you use them.
Compliance with standards
ENGLISH ENGLISH
Introduction
Congratulations on your purchase and welcome to Philips! To fully benefi t
from the support that Philips offers, register your product at www.philips.
com/welcome.
Please read this user manual, as it contains information about the wonderful
features of this shaver as well as some tips to make shaving easier
and more enjoyable.
General description (Fig. 1)
A Shaver
1 Protection cap
2 Shaving unit
3 Shaving unit release button
4 Shaver on/off button
5 Shaving head symbol
6 Battery light
B Adapter
C Jet Clean System
1 Locking lever
2 Shaver holder
3 Cleaning chamber release button
4 Jet Clean System on/off button
5 Shaving head symbol
6 Battery symbol
D Jet Clean solution (HQ200)
E Cleaning brush
Important
Read this user manual carefully before you use the shaver and the Jet Clean
System. Save the user manual for future reference.
Danger
- Keep the adapter dry.
Warning
The adapter contains a transformer. Do not cut off the adapter to -
replace it with another plug, as this causes a hazardous situation.
The shaver and the Jet Clean System are not intended for use -
by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they
have been given supervision or instruction concerning use of these
appliances by a person responsible for their safety.
Children should be supervised to ensure that they do not play with -
the shaver and the Jet Clean System.
Always unplug the shaver before you clean it under the tap. -
Caution
- Never immerse the shaver in water.
- Never immerse the Jet Clean System in water nor rinse it under the
tap.
Do not use the shaver in the bath or in the shower. -
Never use water hotter than 80°C to rinse the shaver. -
Be careful with hot water. Always check if the water is not too hot, to -
prevent your hands from getting burnt.
The shaver, the Jet Clean System and the other accessories are not -
dishwasher-proof.
Water may leak from the socket at the bottom of the shaver when you -
rinse it. This is normal and not dangerous because all electronics are
enclosed in a sealed power unit inside the shaver.
Do not use the shaver, Jet Clean System, adapter or any other part if it -
is damaged, as this may cause injury. Always replace a damaged adapter
or part with one of the original type.
Use, charge and store the shaver and the Jet Clean System at a -
temperature between 10°C and 35°C.
Always place and use the shaver and the Jet Clean System on a surface -
that is fl uid-resistant.
Only use the adapter and accessories supplied. -
Always put the protection cap on the shaver to prevent damage and to -
avoid dirt accumulation in the shaving heads.
Only use the Jet Clean System with the original Jet Clean solution -
(HQ200).
Always place the Jet Clean System on a stable, level and horizontal -
surface to prevent leakage.
When the Jet Clean System is ready for use, do not move it to prevent -
leakage.
The Jet Clean System thoroughly cleans but does not disinfect your -
shaver, therefore do not share the shaver with others.
Empty the cleaning chamber of the Jet Clean System and clean the -
cleaning chamber thoroughly by rinsing it with hot tap water every 15
days.
If the shaver and the Jet Clean System are subjected to a major change -
in temperature, pressure or humidity, let them acclimatise for 30
minutes before you use them.
Compliance with standards
ENGLISH ENGLISH
PT729CC_A6_CS3.indd 25 13.4.26 2:47:16 PM