Filter
Top Products
3 The shaver is not entirely clean after I clean it in the Jet Clean
System.
- The cleaning uid in the cleaning chamber may be soiled. Empty and
rinse the cleaning chamber.
- The cleaning uid level may be too low. If the uid volume in the
cleaning chamber drops below the minimum level during the cleaning
program, the program aborts.The cleaning symbol and the ‘uid low’
symbol ash at intervals and the holder returns to its starting position.
Rell the cleaning chamber with cleaning uid up to the MAX
indication (see chapter ‘Cleaning and maintenance’).
- You may have used another cleaning uid than the original Philips
cleaning uid. Only use HQ200 cleaning uid.
- The locking lever of the Jet Clean System has not been closed
properly, or the shaver has not been placed properly. If this is the case,
the Jet Clean System starts to operate, but the cleaning program
does not function properly.
4 The Jet Clean System does not work when I press the on/off
button.
- The Jet Clean System may not be connected to the mains. Put the
small plug in the Jet Clean System and put the adapter in the wall
socket.
23