Filter
Top Products
16.
My Race N Play Wireless does not seem to operate properly and is
losing connection with the Receiver.
1. It is quite normal to have interference from other
devices in your home such as cell phones, cordless
phones, wireless networks, or even microwaves. Because
of this Race N Play Wireless has three different channels /
frequencies to choose from in case there is interference on
one of the channels / frequencies. Switch to another chan-
nel / frequency if you are experiencing non-normal opera-
tion or lag. Please verify that the receiver is also switched to
the same channel / frequency.
2. If you have two Race N Play Wireless controllers verify
that they are each set to a different channel / frequency and
their corresponding Receiver matches the channel /frequen-
cy that the controller is set to. If you are not using your sec-
ond Race N Play Wireless controller you should always
make sure it is in the off position.
3. Unplug the Receiver Unit and reconnect it if you are still
experiencing problems. This will reset the connection
between the Race N Play Wireless and the Receiver.
PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 18