Filter
Top Products
10.
4. Make sure the Receiver channel is set to the
same channel as the controller. This is important,
if the channels don’t match on both the controller
and the receiver there will be no communication
and the product will not function.
Note: If you are using more than one Race N Play Wireless
Controller you must use different channel settings, i.e. the first
controller and receiver are set to Channel 1, the second con-
troller and receiver are set to channel 2. The channel position
selected on the controller and receiver have no relation to the
PlayStation® 2 controller ports.
Note: If you have the Channel switch set to “car” you will not be
able to use it with the PlayStation® 2. The Controller will only
control the Race N Play Car.
PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 12