Filter
Top Products
11.
5. Plug your new Race N Play Receiver Unit into
controller port one. If you already have a con-
troller and want to use Race N Play Wireless as
a second controller, make sure you have a con-
troller plugged into controller port one and plug
the Receiver Unit into controller port two.
6. Insert a game into your PlayStation® 2 and
turn the system on.
7. The signal LED will be green when a connec-
tion is made between the controller and the
receiver.
8. You are now ready to play.
PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 13