Filter
Top Products
15.
Trouble Shooting For
Race N Play Wireless Controller
If you are having difficulties with your new Race N Play Wireless Controller
please refer below:
The Vibration function is not working on my new Race N Play
Wireless controller.
1. Race N Play Wireless does not support Vibration
because the controller is very compact, eliminating the
bulk common to other wireless controllers and was
designed for maximum battery life.
My system turns on but I don’t see anything on the TV.
1. Check to verify that your A/V cable is properly
connected to your system.
2. Check to verify that your A/V cable is properly
plugged into your television set.
My Race N Play Wireless does not respond.
1. Check to verify your Race N Play Receiver unit is firmly
and properly plugged into controller port one, or port two if it
is for a second player.
2. Check to verify that your batteries are inserted
correctly. Make sure both batteries are inserted. Please
refer to page 9 for more details on inserting the batteries.
3. Check to verify that the Race N Play Wireless and
the Receiver Unit are on the same channel / frequency.
Please refer to page 8 for more details.
4. If the game only functions in Analog Mode, press the ana-
log button until the Mode LED on the Receiver turns red.
5. Unplug the Receiver Unit and reconnect it if you are still
experiencing problems. This will reset the connection
between the Chameleon Wireless and the Receiver.
PL-000 Race N Play Manual.qxd 10/3/03 2:37 PM Page 17