Filter
Top Products
22 C1300M-C (11/08)
PARK TIME
This feature allows the system to begin a specified operation (scan, preset, or pattern) after a
programmed time of inactivity.
Park time can be programmed from 1 minute to 720 minutes (12 hours), or set to zero, which disables
this feature. The default setting is zero.
Park Action
This feature will define the activity when the system parks. The following settings are available:
EXIT
LANGUAGE ENGLISH
UNIT INVERSION OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
UNIT SETTINGS
PROPORTIONAL PAN ON
PARK TIME (MINUTES) 0
PARK ACTION NONE
SCAN SPEED (DEG/S) 25
PRESET FREEZE FRAME AUTO
LIMIT STOPS ON
<SET MANUAL STOPS>
<CLEAR MANUAL STOPS>
<SET SCAN STOPS>
<CLEAR SCAN STOPS>
<SET AZIMUTH ZERO>
<CLEAR AZIMUTH ZERO>
BACK
EXIT
REFERENCE INFORMATION
MANUAL LIMITS SET NO
SCAN LIMITS SET NO
MOTION
NONE (default) No action.
AUTO SCAN The system starts auto scan operation.
RANDOM SCAN The system starts random scan operation.
FRAME SCAN The system starts frame scan operation.
PRESET 1 The system goes to preset 1.
PRESET 8 The system goes to preset 8.
PATTERN 1 The system runs pattern 1.
PATTERN 2 The system runs pattern 2.
PATTERN 3 The system runs pattern 3.
PATTERN 4 The system runs pattern 4.