Pelco C1300M-C (11/08) Sleep Apnea Machine User Manual


 
16 C1300M-C (11/08)
Unit Settings
CAMERA
TYPE OF LIGHTING
Pelco has calibrated settings that optimize the white balance, and the picture, for multiple lighting
conditions; settings differ depending upon the model.
There are two types of lighting settings for 22X models:
T1 (default) For use in outdoor applications.
T2 For use in indoor applications.
There are three settings for 23X models:
T1 (default) For use in outdoor applications.
T2 For use in indoor applications.
T3 For use in applications that use sodium lighting.
AUTO FOCUS
Auto focus allows the lens to remain in focus during zoom-in, zoom-out, and motion functions.
There are two auto focus settings:
ON (default) If auto focus mode is set to ON, the camera will focus
automatically when using pan, tilt, and zoom functions.
Off Focus is operated manually. To focus, press the Focus Far or Focus
Near button on the controller.
ZOOM LIMIT
Zoom limit allows the user to define a limitation on the amount of telephoto zoom. The following are
the zoom limit settings for the ExSite Series systems:
23X Day/Night Camera Camera zooms optically to 23X and then zooms electronically. 32X,
92X,184X, or 230X. Default setting is 184X.
22X Color Camera Camera zooms optically to 22X and then zooms electronically. 22X,
32X, 88X, 176X, 220X, or 264X. The default setting is 176X.
ZOOM SPEED
Zoom speed allows the user to define how fast the dome will go from full wide zoom to the 23X
optical zoom. The default setting is MEDIUM.
Available settings for zoom speed include the following:
22X COLOR 23X DAY/NIGHT
HIGH 2.4 seconds 2.9 seconds
MEDIUM (default) 3.9 seconds 4.2 seconds
LOW 6.3 seconds 5.8 seconds
NOTE: When using the HIGH setting, the image may be out of focus until zooming stops.
LOW LIGHT LIMIT
Low light limit is the maximum duration, in fractions of a second, that the electronic shutter will
remain open in low light conditions. The default setting is 2.
Settings include the following:
2 = 1/2 second 8 = 1/8 second 30 = 1/30 second
4 = 1/4 second 15 = 1/15 second 60 = 1/60 second
EXIT
LANGUAGE ENGLISH
UNIT INVERSION OFF
<SYSTEM INFORMATION>
<DISPLAY SETUP>
<UNIT SETTINGS>
<POSITION CALIBRATION>
RESET CAMERA
CYCLE CAMERA POWER
REBOOT SYSTEM
PELCO EXSITE IPSXM
<CAMERA>
<MOTION>
<POWER UP>
<LINE SYNC>
<PRESETS>
<PATTERNS>
<ZONES>
<WINDOW BLANKING>
<ALARMS>
<WIPER>
<AUX>
<CLEAR>
<PASSWORD>
BACK
EXIT
UNIT SETTINGS
TYPE OF LIGHTING T1
AUTO FOCUS ON
ZOOM LIMIT X184
ZOOM SPEED MEDIUM
LOW LIGHT LIMIT 2
IR CUT FILTER* AUTO
AUTO IR LEVEL* DUSK
<ADVANCED SETTINGS>
BACK
EXIT
CAMERA
* Available only with the 23X day/night camera.