Filter
Top Products
11
BEFORE USE
English
3.
Adjust the "month" --> " date" --> "hour"
--> "minutes" by repeating procedures in
step 2.
4.
Press to complete the
settings.
This setting cannot be completed by
●
pressing
before adjusting
the "hour" and "month". Be sure to press
after adjusting the "hour"
and "month" to complete settings.
The set time will disappear after 5 seconds.
●
To reset, perform the procedures in *
step 1. to 4.
1.
Hold (for 3 seconds or
longer).
"year (2011)" will ash.
2.
Adjust the "year".
(1) Press
to set the desired
number.
(2) Press
to complete the
setting.
Setting range for years is from 2011 to
●
2050.
Setting the time and date
Set the date and time before selecting the OFF/ON & START button. *
Be sure to set the date and time before taking the rst measurement after purchasing *
the blood pressure monitor or after changing the batteries.
During setting, if no button is pressed for 5 minutes or more, the clock will be *
displayed as "-:--", and the power will be o without saving any settings. It is also
possible to perform measurement and recording even under this circumstance.
However, the record will not include any time information.
Hold
"year"
"month"
mm/dd
"date"
"hour"
"minutes"
Adjust the ashing numbers
sequently
Complete setting
Adjust numbers
BU35.indb 11 2011/06/14 14:28:17