Filter
Top Products
15
If trouble occurs while you are using the monitor, check the following points first.
Nothing is displayed
when you press the
START/STOP button.
Blood pressure value
differs each time I
measure or the blood
pressure value is
displayed abnormally
high (low).
Measurement cannot
be made.
Or, blood pressure
values are displayed
abnormally high (low).
The blood pressure
values differ from the
brachial pressures.
The wrist cuff does
not inflate to the
required pressure and
an E is displayed.
Trouble What to check How to correct
Are the batteries worn
out?
Are the polarities of
batteries wrong?
Did you keep the wrist
cuff at the same level
as your heart?
Is the wrist cuff
wrapped snugly?
Are you putting too
much stress on your
shoulder or arm?
Are you talking or
moving your hands
during measurement?
Is the wrist cuff leaking
air?
After referring to the section on pages 17 to 18,
consult the nearest OMRON dealer.
Blood pressure value varies according to the
mental state during measurement or the
measuring time. Take a deep breath, relax, then
measure again. (Refer to Page 17 to 18.)
Replace the batteries
with new ones. (Refer
to Page 6.)
Insert the batteries with the
polarities in correct
direction. (Refer to Page 6.)
Measure your blood
pressure in the correct
posture. (Refer to Page 8.)
Wrap the wrist cuff
correctly. (Refer to
Page 7)
Relax, and measure.
(Refer to Page 8.)
Keep still and measure
again.
(Refer to Page 8.)
Ask for the repair.
* If you cannot measure your blood pressure correctly even after taking the above mentioned
measures, the monitor may have malfunctioned.
* To confirm the problem or request for repair, consult the nearest OMRON dealer.
* In some very rare cases, some error may be caused by the physical natures. In such a case,
please consult the doctor.
Troubleshooting
OMRON-R5 (Eng) 11/27/03 10:48 AM Page 15