Filter
Top Products
9
When it is ready to measure, take the measurement in the following
procedure. To start measurement, simply press the START/STOP button.
1. Press the START/STOP button.
(1) Press the START/STOP
button.
Release the Button when
the display turns on.
(2) Initial display.
All display symbols turn on
for about 0.5 seconds.
* The battery replacement mark
shown here does not
mean batteries are worn out.
(3) Deflation display.
A mark starts to flash.
(4) The monitor starts to inflate
and measure.
* Because measurement is
made during inflation, do not
move your hand, wrist, or arm
after the monitor starts to
inflate.
These marks disappear one by one
as the measurement proceeds.
How to Measure Blood Pressure
OMRON-R5 (Eng) 11/27/03 10:48 AM Page 9