Filter
Top Products
11
The R5 Blood Pressure Monitor can record up to seven measurements.
1. Press the MEMORY button ("M" button).
* Immediately after completion of the measurement, the memory may not
be called even by pressing the "M" button. In that case, leave the finger
from the "M" button and press it again to call the memory.
* You can recall up to seven measurements.
* Memory capacity is maintained in a "first-in-first-out" basis, ie the oldest
readings will be deleted first.
The latest measurements are
displayed.
Each time the "M" button is pressed,
the previous measurement values are
displayed.
Press the "M" button.
Press the "M" button.
The measurement values can be recalled after completion of the
measurement or even when the power is off.
When all the stored measurement
results are displayed, the display of the
present measurement result or the first
measurement result will resume (if the
memory is recalled when the power is
off.)
How to Use the Memory Function
OMRON-R5 (Eng) 11/27/03 10:48 AM Page 11