Filter
Top Products
20
5.Using the Unit
5.4 Measuring Weight Only
1. Push the power switch to turn on the unit.
“CAL” blinks on the display, then the display changes to 0.0 kg.
Wait until 0.0 kg appears on the display.
2. Step onto the measurement platform.
Make sure that you are standing with your weight evenly
distributed on the platform.
Remain still and do not move until the measurement is
complete.
If you do not step onto the measurement platform within five
minutes of 0.0 kg appearing on the display, the unit will
automatically turn itself off.
3. Your weight is displayed on the display and blinks
briefly to indicate that measurement is complete.
At this point you may step off the measurement platform.
4. Push the power switch to turn off the unit.
Your feet
HBF-400.book Page 20 Wednesday, October 15, 2008 12:05 PM