Filter
Top Products
14
5.Using the Unit
5. Using the Unit
5.1 Taking a Measurement
1. Push the power switch to turn on the unit.
“CAL” blinks on the display, then the display changes to 0.0 kg.
Wait until 0.0 kg appears on the display.
2. Select Personal ID or Guest mode.
If you have a personal profile (Personal
ID) registered on the unit:
1. Press the USER
button until the ID
number for the
personal ID
containing your
personal profile
blinks on the
display.
Notes:
• If an error occurred for the body fat
percentage measurement during the
previous measurement,
“– – –” will be
displayed for %FAT.
• If you want to check
the last
measurement
results, press the
GUEST/MEMORY
button while your
personal profile
blinks on the
display. The memory indicator is
displayed. After you check the last
measurement results (refer to p. 15),
push the power switch to turn off the unit.
2. Press the SET button.
“CAL” blinks on the display, then the
display changes to 0.0 kg.
Wait until 0.0 kg appears on the display.
If you do not have a personal profile
registered on the unit (Guest mode):
1. Press the GUEST/MEMORY button.
The GUEST indicator appears on the
display and the age setting blinks.
2. Enter the information for your age,
gender and height. (Step 4 in “4.
Setting and Adjusting Personal Data”
on page 12)
Press the or buttons to adjust the
settings for each category and then press
the SET button to confirm each setting.
After you confirm the setting for height,
the unit displays the settings for all three
settings then 0.0 kg appears on the
display.
HBF-400.book Page 14 Wednesday, October 15, 2008 12:05 PM