Filter
Top Products
19
705CP-II English
How to connect
the printer unit
Remove printer cable plug from the printer unit.
Connect printer cable plug cord to the main unit.
The circle on the cable plug should face up.
Open printer cover in the direction indicated by
the arrow symbol and remove paper roll from the
main unit.
Peel of the glued edge of the printing paper
included with the unit, and cut the first 10 cm (4
inch) with a pair of scissors.
Press theȄFEED button while inserting the edge
of the printing paper into the paper feeding slot.
When the edge of the paper protrudes sufficiently,
release the ȄFEED button.
Close the plastic printer cover. Make certain that
the paper sticks out from the top when the cover
is replaced.
Thermal sensitive paper is supplied with the unit.
Use only thermal paper of similar size (width
approx. 38mm) and roll diameter (not to exceed
approx. 26mm)! These rolls of paper can be
ordered from OMRON. Printer paper can be
ordered by your OMRON shop or distributor.
4in
How to load the
printer paper