Filter
Top Products
14
705CP-II English
Technical data
This device fulfils the provisions of the EC directive
93/42/EEC (Medical Device Direc tive). This blood
pressure monitor is designed according to the
European standard EN1060, Non-invasive sphygmo-
manometers Part 1: General requirements and Part
3: Supple mentary requirements for electromechani -
cal blood pressure measuring systems. This OMRON
product is produced under the strict quality system
of OMRON HEALTHCARE CO. LTD., Japan. The Core
component for OMRON blood pressure monitors,
which is the Pressure Sensor, is produced in Japan.
Model: OMRON 705CP-II
Display: LCD digital display
Blood Pressure Pressure: 0 mm Hg to 299 mm Hg
Measurement Range: Pulse: 40 – 180/min.
Accuracy: Pressure: ±3 mm Hg
Pulse: ±5% of reading
Memory: 28 measurements
Inflation: Fuzzy-Logic controlled by electric pump
Deflation: Automatic pressure release valve
Pressure Detection: Capacitive pressure sensor
Measurement Method: Oscillometric method
Power Source: 4 Alkaline batteries 1.5V (Type LR6) or
AC/DC adapter (optional, 6V = 4W)
Battery Life: Capacity of new batteries is approx. 300 measurements
Operating Temperature: 10°C to 40°C
Storage Temperature: -20°C to 60°C
Humidity: 15 to 90% RH maximum
Storage humidity: 10 to 95% RH maximum
Console Weight: Approximately 380g without batteries
Outer Dimensions: Approximately 115 (l) mm x 177 (w) mm x 71 (h) mm
Cuff Dimensions: Approximately 140 mm x 480 mm
(arm circumference 22 – 32 cm)
Accessories: Medium cuff, instruction manual, storage case, battery
set
Made in China
NOTE: Subject to technical modification without prior notice
= Type B
• Disposal of this product and used batteries should be carried out in accordance
with the national regulations for the disposal of electronic products.