Filter
Top Products
3-19
Using the Infrared Thermometer/Transmitter
3
6. After all data is taken, press and hold the key until
the Emissivity Display Mode (E) appears.
3.5.8 Sending Temperature Data to a Personal Computer
(OS552, OS553, OS554)
The thermometer can transmit temperature data to a
Personal Computer via the RS-232 phone jack and the
RS-232 cable.
1. Turn on the Computer.
2. Connect the RS-232 cable between the thermometer and the serial
port (RS-232 of the Personal Computer as shown below in Figure 3-11).
3. With power applied to the OS550, press the key. The
icon will appear on the display.
Figure 3-11. Personal Computer Hookup
3.5.8.1 Software Installation
System Requirements
To run IR_TEMPSOFT you must have an IBM-compatible personal
computer with these minimum specifications:
RS-232
Digital Cable
NOTE
Bottom hole is
the RS-232 jack
Personal
Computer
25-Pin 'D'
Connector
6-Pin
Phone Jack
To the
Computer
To the
Pyrometer
°F
PRN
°F
PRN